For over 20 years, Thermobond HRC has been the go to solution for reducing the cost of electricity and heat reduction all over the world. Achieving 25 – 30% in cooling energy cost reductions, shopping centres, universities, schools, libraries and warehouses, Thermobond HRC heat reflective paint operates on three levels:

  • Solar Reflectivity
  • Very High Heat Emmisivity
  • Membrane Thickness

This means that our Thermobond HRC heat reflective paint does not allow the passage of heat from the sun to reach the surface or material it has been installed on. The heat reflective paint can be applied to almost anything that would benefit from a reduction in temperatures as a result of direct sunlight.

Application is non-disruptive to business, requires little to no maintenance and is backed by our comprehensive 10-year guarantee. THERMOBOND HRC is available in Arctic White and eight pastel colours.

See How Shieldcoat THERMOBOND helps you save!

Key Benefits of Using THERMOBOND HRC

Independently tested by Queensland University of Technology

Lower Air Conditioning Running Times*

Electricity Cost Savings*

Proven Peak Energy Demand Reduction*

Reduced Carbon Footprint

Increased life of Building Materials

Cooler Working/Living Environments

Easily Installed

Minimal Maintenance

Superior quality, unmatched services, tailored solutions – for homes & businesses

CASE STUDY: Arndale Shopping Centre

Arndale Shopping Centre is a warehouse style retail building with two tenancies. The roof area is approx.. 1250m2 and the floor area is equally divided by the two tenancies. Each have a separate air conditioning system. Other than a small area in the eastern corner, there is no shade on the roof and the building is completely surrounded by hard concrete surfaces.

Post coating with Thermobond HRC, the average roof surface temperature reduced by a staggering 9.3 and 8.6 degrees respectively. This data was extracted from a study carried out by Ergon Energy.

Get a Free Quote
close slider

Request a Quote

  • This field is for validation purposes and should be left unchanged.